Important information for 1300 Stock Car Drivers

Following a recent meeting of the 1300cc Stock Car Association, scrutineers have been asked to check the following on cars. Please note these are not new rules but are ones which were in last years rules but might not have always been checked.

Front and Rear bumpers MUST be minimum 12 inches (measurements taken from outside edges)

 ALL of the rollcage (including the rear supports) must be constructed of either  38mmx38mm or 40mmx40mm SHS or CHS, with a wall thickness of 3-3.5mm

 Suspension must be exactly to the rules.

 Non 1300 engined cars must run a standard (non lightened ) flywheel.

 These must be addressed NOW, even if your car is a used or a new build.